EDEL 200W - Water/Water DHW High Power Heat Pump with 200 litres stainless steel storage

Water - / Water High Power Heat Pump supplied with a storage tank of 200 L and electrical heater of 1500 Watt   

This high-performance heat pump is designed for combination with a floor heating system. It receives the energy to heat hot water from the return water of the underfloor heating, a corresponding deflection unit is supplied for this purpose. In the summer months, the floor heating circle is used as heat exchangers, with the cold water produced being fed back to the floor circle, thus serving to lower the room temperature.

The Heat Pump is working with a patended technology certificated with a 3 star label. The COP of 3.03 is confirmed by the standard according EN 16174. The water temperature of +60°C is available up an ambient air temperature of  18 up to 35°C and can be adjusted to +65°C, in this case the electrical heater is switched on additional. In boost-mode the double power is available which completely switch off in case the set temperature is reached. In special situation 800 l warm water per day is available.

The installed special Scroll compressor is mounted on 3 anti-vibrations and guaranty a very low noise level. Since a fan is not required, as with an air / water heat pump, the installation of the unit is not restricted to any special requirements and can also be accommodated in a small space.

Technical Date:

Storage volume:  200 l

Storage shell:  stainless steel

Korrosion protection: not necessary, 

Max storage pressure: 6 bar

Dimensions: Diameter 630 mm x 1470mm H

Transport weight: 72 kg

Electrical power: 230V / 1ph / 50 Hz - 16 A

Max. power consumtion 2,0 kW (incl. electrical heater)

Refrigerant: R 900

Kompressors pressure max. 25 bar

Working condition: 18°C bis +35°C

Noise level 1m distance max. 34 dBa

Max Stromverbrauch Wärmepumpe 520 W

Max electrical power consumption W18/W45°C for 200L storage: 1,0 kW